MY24.5+ Ford Ranger/Everest Integration Kit

NEW PRODUCT!

$40.00$150.00

This kit allows you to wire your Safety Dave camera into model year 24.5 and above Ford Rangers and Ford Everests that are optioned with the Towing Pack.

PLEASE NOTE – The Ford Ranger/Everest Only Allows for 1x Safety Dave Camera to be Integrated, if you have the Dual Camera unfortunately this kit is not suitable for you.

Please see below for further information.

Installation Guide: Ford Ranger-Everest Integration Guide

This kit allows you to wire your Safety Dave camera into model year 24.5 and above Ford Rangers and Ford Everests that are optioned with the Towing Pack.

What's included?

Pre-Spliced Male Patch Lead
7.5m Cable
AHD Converter (Optional)

Purchase Online

Specifications

Description

This kit allows you to wire your Safety Dave camera into model year 24.5 and above Ford Rangers and Ford Everests that are optioned with the Towing Pack.
The vehicle allows for 1x Safety Dave Camera to be displayed through the factory 12″ Display.
By default, this screen allows for only NTSC (Standard Definition) Cameras to be displayed. 
If you have an AHD camera, then you must purchase a AHD Converter to convert the signal over to NTSC.

The wiring that allows you to integrate the Safety Dave camera is located in the passenger footwell of the vehicle.
We typically recommend an Auto Electrician to perform this install, you can see recommended installers near you with this link: https://safetydave.com.au/rear-vision/recommended-installers-stockists/

Included in the kit is:

1x Pre-Spliced Male Patch Lead to wire into the Ford wires

1x 7.5m Cable to run to the rear of the vehicle

Optionally you can purchase this kit with an AHD Converter if Required. 

Woza Parts, such as a Carside Socket are sold separately to this kit

Ford Ranger-Everest Integration Guide – Here is our Installation Guide